ปั๊มปลาลอยน้ำ 4hp จะลอยตัวที่บ่อปลาออกซิเจนสำหรับเครื่องบินไอพ่น จีน

Ben Lang type high wave oxygen diving irrigation floating pump

2.Matters needing attention:
(1) You should carefully check the transmission line and voltage, knife switch, fuse box, plug and socket is good contact in the floating pump before, must install leakage protection.

(2) Before work should be connect the ground wire, when working within a radius of five meters to allow no one to enter, the power should be cut off  when moving the water pump, in case.

(3) The pump without water or water rarely, should check whether the bottom intake is blocked ,such as three-phase should be replaced by three lines of any two lines can be,make the motor clockwise.

(4) When the voltage is too low, the three-phase power supply is lack of phase and the three-phase voltage is unbalanced, the protector will automatically cut off the power supply and protect the motor from being burnt out. When the pump impeller is jammed by the foreign body and causes the motor to overload, it will also cause the protector to take off. The above fault can not be regarded as a time switch, should be cut off the power supply, please electrician inspection.

3.Aeration of fish ponds

The screw is connected with the pump flange with a floating body, mounted on the nozzle into the water, with a rope soza in rings floating body is fixed on the necessary position, power can spray aerator.
The floating pump suspended in deep water to suction lower oxygen poor water and then from the nozzle, forming rapid spray into the air and water in contact with the air in the air, increase the oxygen content in the water is dispersed into water droplets, ranging from the size of the drop in the pond water, the formation of a storm circle, water blisters and stir water, pond water convection causes the increased volatility of oxygen and lower water, play a role in fish pond.

4.Diving irrigation and drainage

The floating body is connected with a screw and pump flange, install water outlet ,with the wire hose fastening clamps, no port, not afraid of rain water, not limited suction, directly into the water, will be able to start pumping power, the mobile is very convenient, in the shallow water depth of less than 10 cm deep can stand the use of water, but the water medium can not exceed the standard, because the pump is double cold type manufacturing, as long as the outlet water outflow motor is cooled, will not affect the service life of the water pump, other submersible pumps are not comparable with it.

Packing:Motors are packed in plywood cases or carton,floatings are packed in bag or in nude.
Shipping:All goods can be shipped by sea,land,train,plane. And we accept FCL or bulk shipment.