การจัดส่งแบบแวะพักอุปกรณ์ตรวจจับการรั่วซึมของน้ำในอ่างอาบน้ำและรถยนต์ ระบบปิดน้ำ

) Key Specifications/Special Feature

• Water leak can cause large economic loss, to avoid expansion of damage caused by water leakage.
• It will alarm as well as send out a sign to electric valve once the sensor detected water leaking
• Electric valve automatically close the water power after receive the sign
• Provides reset switch to stop alarm
• 2 meter wire with sensor for long distance detecting
• Usually suitable for underground reservoir of high building SPA and so on.
• You can also place it near toilets, basements, washing machines, air-condition machines, refrigerators, dishwashers, sinks, aquariums, sump pumps, water heaters, and anywhere with potential water damage
• Protects you home by keeping the leak alert anywhere water leak is a potential danger

2) Specification:

• white case and black wire,consisting of 110V power supply UL approved
• 6m lead wire,plug ends and end sensors
• Automatic Shut-off Valve,12V DC,Threaded ends to US standards(NPT)
• plastic case silk screened with product name,part number ,away/closed,home/open,and reset at button locations
• Working Voltage: 12V
• Max. working current: 80mA
• Standby current: 5mA
• Alarm startup time: 1 second
• Alarm time: continue
• Output electric potential: 100dBu
• Valve close startup time:1 second
• Valve open startup time: 1 second

Indicators : 1.Power indicator (AC adapt or) 2.Leak detect point indicators - 8pcs

Accessories:6m sensor wire (optional: 1sensor / 8 sensor)

Sensor wire - 1pcs/8pcs,AC adaptor12V- CE,UL approval

3) Where we use

Also widely used for swimming pool, air conditioner, hot water tanks, piping, washing machine, water treatment....

4) Top 5 Places to install water leak detector

• Under the Bathroom Sink
• Behind a Leaky Toilet
• Under a Dishwasher
• By the Water Heater
• Under the Refrigerator

How to use

？ Put the water sensor on the place where water leakage may happen

？ Turn off the valve, and connect it to water pipe, to be sure the valve interface can not have leaks, then the valve connected to the central unit

？ Connect central unit to the AC power,(Power LED indicator will light up. Sound one beep and Sensor LED will light from Sensor 1 to Sensor 8) press the OPEN button to open the valve.

？ Once leakage happens, when the water touch the water sensor, the central unit will immediately sound warning tone and corresponding LED light up (until there is no detection of leakage,If more than one Sensor detected water leakage, all corresponding LED will also light up ), then the valve will automatically shut off

？ User can repair the place where water leak happens according to the audible alarm, and press the RESET button to turn off the alarm

？ After maintenance and all the leakage were repaired, press the OPEN button to open the valve (you can also press the CLOSE button to test if the valve is working properly). press Reset button and resume to Standby state

？ Keep the water sensor flat where water leakage may happen after sopping up the water, the device can be recycled