เครื่องอบแห้งแบบฟลัชอีวาโพเรชัน - อุปกรณ์อบแห้งหลายฟังก์ชันสำหรับวัสดุที่มีความเหนียว, วัสดุที่ไวต่อความร้อน, โพลิเมอร์, สารเติมแต่งเคมี, สารเติมแต่งอาหารและอาหารสัตว์

• การปรับแต่ง: มีอยู่
• บริการหลังการขาย: อายุการใช้งานยาวนาน
• ประกันสินค้า: 1 ปี
• ไม่ใช่ ของรุ่น: XSG Series
• วิธีเคลื่อนไหว: แก้ไขแล้ว
• การทำให้เป็นละออง: การทำให้ก๊าซเป็นละออง
• โฟลว์: การไหลเชิงสูตร
• โหมดทำความร้อน: เกียร์
• สถานะวัสดุ: ผงแป้ง, สายคล้อง, ขนาดใหญ่
• สื่อสำหรับทำให้แห้ง: ไอน้ำร้อนจัด, อากาศ
• น้ำหนัก ( กก .): 1000
• ให้บริการหลังการขาย: วิศวกรพร้อมให้บริการเครื่องจักรต่างประเทศ
• ขนาด (l*w h): ดูพารามิเตอร์ทางเทคนิค
• แหล่งความร้อน: ไอน้ำ / ไฟฟ้า / ก๊าซ / น้ำมัน
• จุดขายหลัก: อเนกประสงค์
• แรงดันไฟฟ้า: มาตรฐานท้องถิ่นของลูกค้า
• วิธีการให้ความร้อน: การอุ่นน้ำมันก๊าซด้วยไอน้ำ
• การใช้งาน: ลดความชื้นของวัสดุ
• การติดตั้ง: คำแนะนำของวิศวกร
• วัสดุ: สแตนเลสสตีล / เหล็กคาร์บอน
• พิมพ์: อุปกรณ์ทำให้แห้งโดยใช้แฟลช
• ส่วนประกอบหลัก: แบริ่ง , ปั๊ม , เฟือง , มอเตอร์ , เครื่องยนต์
• ชื่อผลิตภัณฑ์: ตัวปั่นผสมหมุนปั่นแห้งสำหรับแป้งมันสำปะหลัง
• ประเภทผลิตภัณฑ์: เครื่องเป่าผมแห้งระบบทำความร้อน
• แอปพลิเคชัน: อาหาร / เคมี / อุตสาหกรรม / เกษตรกรรม
• แพคเพจการขนส่ง: ภาชนะบรรจุมาตรฐาน
• เครื่องหมายการค้า: WD
• ที่มา: Liaoning, China
• กำลังการผลิต: 100

คำอธิบายสินค้า

 

Product Description

 

Large Capacity 24-hour Continuous Operation Good Drying Effect Energy Conservation Environment Protection

Brief Introduction:

Flash dryer is a new type of continuous drying equipment integrating drying, crushing and screening. It is especially suitable for drying filter cake, paste and slurry materials. The drying time of wet materials in the drying tower is only 5-8 seconds, and the water evaporates instantly. The quality of dried products is closely related to the drying temperature, wind speed, air volume and crushing speed. The hot air enters the annular gap at the bottom of the drying chamber in the tangential direction from the inlet pipe and rises spirally. At the same time, the materials are quantitatively added into the tower by the feeder and fully heat exchanged with the hot air. The larger and wetter materials are mechanically crushed under the action of the agitator. The materials with low moisture content and small particle size rise together with the rotating air flow and are transported to the separator for gas-solid separation, The finished products are collected and packaged, and the tail gas is discharged after being treated by the dust removal device.

Features and Advantages:

1. The drying process of the materials in the room is fast, and the drying time of the materials in the room is short, which can effectively prevent the deterioration of the sensitive materials. 2. The drying chamber is equipped with grading ring and cyclone, and the fineness and final moisture of materials are adjustable. The special air distribution device reduces the equipment resistance and effectively improves the drying uniformity of materials. 3. Special cooling device and air tight package are set at the bottom of the dryer to avoid deterioration of materials in the high-temperature area at the bottom. 4. It can effectively control the final moisture and fineness, and ensure the uniformity of moisture content and fineness of products through the adjustment of feeding, hot air temperature and classifier.

Product More Pictures

 

 

Customer Site:

Product Parameters

We also have multi-layer model, and our dryer is non-standard, can be customized according to the actual requirements, if you are interested, please feel free to contact us.

Application Field

Paste, slurry, filter cake and other materials, plate and frame pressure filtration or centrifuge dewatering materials. For example:
1. Inorganic: boric acid, calcium carbonate, hydroxide, copper sulfate, iron oxide, barium carbonate, antimony trioxide, various metal hydroxides, various heavy metal salts, synthetic cryolite, etc;
2. Organic matter: atrazine (pesticide), lauric acid, benzoic acid, benzoic acid, bactericide, sodium oxalate, cellulose acetate, etc;
3. Ceramics: kaolin, silica, clay, etc;
4. Dyes: anthraquinone, black iron oxide, indigo pigment, butyric acid, titanium hydroxide, zinc sulfide.
5. Food: soybean protein, gum starch, distiller's grains, wheat sugar, wheat starch, etc.

Working Principle

The flash dryer is driven by the agitator to form a strong rotating wind field by the tangent of hot air into the bottom of the dryer. The materials enter the dryer from the screw feeder. Under the strong action of high-speed rotating impeller, the materials are dispersed under the action of impact, friction and shear force. The massive materials are quickly crushed, fully contacted with hot air, heated and dried. The dried materials are carried by the airflow into the dust collection system for collection and treatment. The tail gas with dust content ≤ 50mg / m3 meets the environmental protection requirements is drained by the induced draft fan to complete the whole drying process.

Company Profile

Our Services:

Pre-Service:
1. 24 hours online consult and service
2. Introduce the product to the customer in detail, answer the question raised by customer carefully;
3. Make different plans for choice according to the needs and requirements of customers;
After-sale Service:
1. Help to install and debug the equipment;
2. Provide 24 hours technical support by e-mail or phone;
3. Keep sufficient replaceable spare parts;
4. Help customers solve any other questions about products or other aspect;
5. Establish long-term and friendly relationship.
Service Commitment:
1. We will provide one-year warranty period to make sure your machine runs consistently. We always keep certain inventory level of spare parts, which means the replacements can be shipped to you right away.
2. Consultant services for whole machine life, 24 hours technical support by email and telephone.
3. Send technicians to the job site for guiding the installation and adjustment, training operators and finishing the check and accept together with you.

Our Honors:

Our Customers Visiting:

LIAOYANG WANDA MACHINERY CO.,LTD is specialized in design, development, manufacture and sale of chemical and packaging machinery. Our products include Flash, dryer, belt dryer, fluid bed dryer, spray dryer, fluid bed dryer, paddle dryer, rotary dryer, vacuum oven dryer, hot air circulation oven dryer, powder and granulator packing machine and so on.

Looking to the future with a commitment to design innovation and quality products, supported by an outstanding level of customer service. The unexcelled quality machinery can be easily obtained from us because we maintain the quality and standard of our products from incoming raw materials to the finished products. Our company follows strict quality controls and various systematic procedures. We take utmost care of quality at every stage of the manufacturing process.

Our research and development wing is our asset that develops and incorporates innovative ideas and products. Our Team is full of experienced and qualified professionals, who have sound knowledge about the quality of our machinery. Our products are far sold to Europe, U.S.A., and the southeast Asia. They are well received by customers both at home and abroad.

FAQ

1. What data is required to confirm the model?
(1) Materials to be dried (2) Treatment capacity per hour (3) Moisture requirements before and after drying

2. What certificates do you have?
We can provide CE, ISO 9001, etc.

3. What is the warranty period of the equipment?
Normally 1 year warranty.

4. Can we visit your factory?
Of course, we sincerely invite you to visit. If it's not convenient for you to come to the site, we can also arrange a video conference to visit the factory.

5. Can we bring our own materials to your factory for experiments?
Of course, you are welcome at any time. We will arrange professional engineers and technicians to do experiments and analyze data for you on site. Or you can send your materials to us.

6. Can it be customized?
Of course, our equipment can be customized according to the actual requirements of customers.

7. How long is the construction period?
It's about 30 days, but it also needs to be determined according to the specific equipment model, order number, etc., But if you need it urgently, please let us know, we can arrange the factory to rush production.

8. Will you provide installation services?
If you need, we can arrange professional technicians and engineers to install and debug on site. At the same time, we also provide online installation guidance and operation training.